SLIDER FOR STEAM PIPES
SLIDING SLIDES ENABLE HORIZONTAL MOVEMENT
A piece of threaded rod was welded into this steam pipe for repair purposes. Threaded rods have no place in a pipeline! This steam line has a Nominal size of DN 100 and a Operating pressure of 16 bar. At a leak can therefore approx. 200 °C hotter Saturated steam escapes unhindered. Through Botched pipeline construction can serious accidents at work, e.g. with burns, can occur. To prevent such sources of danger from arising in the first place, you should only work with qualified specialist companies. Hagelschuer is certified as a company according to AD 2000 HP0. Our tested TÜV certified welders are allowed to perform welding repairs on pressure vessels or pipelines according to the Pressure Equipment Directive. We carry out repair and maintenance work and are your direct contact for piping construction for steam and hot water boiler plants. Our CAD department, together with our experienced project team, creates the entire pipe static for plant sizes from 0.5 t/h to 50 t/h steam output. We have a very high stock of fittings, flanges and brackets. Therefore, we are flexible and have extremely short production times. For projects in pipeline construction, please contact Hagelschuer directly. So that you do not experience any unpleasant surprises!